Crews from the Alabama Department of Transportation (ALDOT) had traffic at a crawl on the Benjamin Fitzpatrick Bridge on Monday as workers milled own the roadway at the westside entrance in an effort to smooth the bridge's connection point to the roadway.

Workers could mill down only the westside lane of the entrance to the bridge because according to ALDOT officials the crew ran into mechanical issues with the necessary machinery and will return to finish the project in the future. 

In May residents expressed their concerns about the condition of the bridge at an ALDOT meeting held at city hall about ALDOT’s projected five-year plan.

The bridge has been in "poor" condition since 1999 and was last listed in ‘fair" condition in 1997. ALDOT said there is no plan to replace the bridge at this time. Photos reveal flaking paint, cracks in the deck surface, exposed rebar and more.

At the May meeting, Alabama Department of Transportation Southeast Region pre-construction engineer Joshua Kervin told residents a new bridge is not included in ALDOT's projected five-year plan and is safe.

Also at the meeting, Tallassee Mayor Johnny Hammock addressed the possibility of painting the bridge which would help curb rusting.

Construction of a bridge that would reroute traffic from the Fitzpatrick Bridge has been talked about for decades. At one time a new bridge was in ALDOT's five-year plan.

"A new bridge across the Tallapoosa River at Tallassee has been talked about for a long time but now two river bridges have been authorized for planning and engineering by the Alabama Department of Transportation," The Tribune reported on Nov. 11, 1999.

The bridge is supported by monolithic concrete with a steel truss deck and, with a lifespan of almost 78 years, the superstructure is beginning to show signs of aging.

According to, the last inspection of the bridge was in August 2017. At that time the bridge was listed in poor condition with average daily traffic at 12,810 vehicles.

Opening in 1941, the bridge connects the east and west sides of Tallassee with a span of 1,737.9 inches. According to the website, the bridge is structurally in poor condition with a sufficiency rating of 6 out of 100.

Additional statistics include:

• Deck condition is fair (5 out of 9)

• Superstructure condition is poor (4 out of 9)

• Substructure condition is fair (5 out of 9)

• Structural appraisal is basically intolerable requiring high priority of replacement

• Deck geometry appraisal is basically intolerable requiring high priority of corrective action

• Water adequacy appraisal is superior to present desirable criteria

• Roadway alignment is better than present minimum criteria

• Channel protection: Bank protection needs minor repairs; river control devices and embankment protection have a little minor damage; banks and/or channel have minor amounts of drift.

• Scour condition: Bridge foundations determined to be stable for the assessed or calculated scour condition.

• Recommended work: Replacement of bridge or other structure because of substandard load carrying capacity or substantial bridge roadway geometry.

To date, the bridge has no weight restriction and 18-wheelers frequently utilize it.